Mesh surface processing
Stainless steel can be used in many kinds of patterns. The advantages of making steel plates with textured or textured surfaces are as follows:

There are roughly five types of surfaces that can be used for stainless steel. They can be combined to produce more end products.

The classification of rolling and polishing surfaces shows the extent to which they can be achieved. Another effective representation is measuring surface roughness. The standard measurement method, called CLA (center line average), measures the lateral m

There are three basic types of surface rolling for sheet and strip, which are represented by sheet and strip production processes.
No.1: after hot rolling, annealing, pickling and descaling. The surface of the treated steel sheet is a dull surface and a b

Note: We should remember that the abrasive paper or belt used in the grinding operation is basically a polishing and cutting operation, leaving very fine lines on the surface of the steel plate.

Polishing surface processing
No.3: expressed by 3A and 3B. 3A: the surface is evenly grind and the abrasive particle size is 80~100. 3B: Wool surface polishing, the surface has uniform straight lines, usually with the size of 180 ~ 200 abrasive belt in 2A